Need help?Do you have a question about the Limitorque SB Series and is the answer not in the manual?
General| Brand | Limitorque |
|---|---|
| Model | SB Series |
| Category | Controller |
| Language | English |
Critical warnings for safe installation procedures.
Best practices for safe actuator operation and installation.
Procedure for setting limit switches.
Procedure for setting two-train geared limit switches.
Procedure for setting four-train geared limit switches.
Procedure for setting torque switches.
Steps to set the double torque switch for SMB-000.
Steps to set the double torque switch for SMB-00.
Steps to set double torque switch for SMB-0 to SMB-5.
Explains the principles of motor operation in actuators.
Guides on operating the actuator using the handwheel.
Outlines the checks for routine maintenance.
Procedures for major maintenance and component replacement.
Guidance on lubrication.
Guidance on inspecting lubricant levels and quality.
Disassembly and reassembly for SMB-000.
Step-by-step instructions for disassembling the SMB-000.
Step-by-step instructions for reassembling the SMB-000.
Disassembly and reassembly for SMB-00.
Step-by-step instructions for disassembling the SMB-00.
To Next Page
