EasyManua.ls Logo

Linak Homeline HC40BL

Default Icon
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 28 of 40
Alarms
The alarm menu is accessible for systems including massage. When the alarm goes off, the massage motors start, providing a
soundless wake-up.
Highlight the ALARMS” bar in the “MY BED” menu and press the ‘select’ button to access the alarm menu, which contains
three alarms.
1. Press the ‘select’ button to enable the alarm. The icon changes to green.
2. Press button 2 “EDIT” to change the alarm.
3. To disable an alarm, simply highlight the alarm and press the ‘select’ button. The icon changes to white/grey.
When the alarm goes off, the massage motors start in the latest used mode and
the HC40 screen shows a bell.
a. Press button 1 “SNOOZE” to snooze the alarm for 9 minutes.
b. Press button 3 “STOP” to stop the alarm.
When the alarm is stopped, it is disabled, and the user has to go to the alarm
menu to enable the alarm again for the next wake-up.