EasyManua.ls Logo

Linak Homeline HC40BL

Default Icon
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 29 of 40
Sleep timer
The sleep timer functionality is a timer for the bed to return to flat position or a predefined favourite position, e.g. a sleeping
position with the head a little raised. A typical use scenario could be a user wanting to fall asleep watching TV. He has the back
of the bed raised and he sets the timer to 30 minutes on the HC40. When the timer elapses, the bed drives to flat position and
he can sleep in a comfortable position.
The sleep timer functionality requires impulse drive enabled.
Highlight the “SLEEP TIMER” bar in the “MY BED” menu and press the ‘select’ button to access the sleep timer.
1. Use the ‘up’ and ‘down’ buttons to adjust the time.
2. Press button 3 “START” to start the timer.
A ‘moon’ icon is now shown next to the time to indicate that the sleep timer is on.
Cancelling/stopping the sleep timer
1. Access the “SLEEP TIMER”.
2. Press button 3 “CANCEL to stop the timer.