IS 713 ECN 4386 Page 3 of 11
This appliance must be installed, commissioned and serviced by a qualified person
in accordance with national and local regulations in force in the country of
installation.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified person.
Ensure wall construction is suitable see Installation and commissioning.
Ensure that the plug/socket is accessible at all times.
Strip plastic coating and clean the appliance before use.
During operation parts may become hot - avoid accidental contact.
Disconnect this appliance before servicing, maintenance or cleaning.
This appliance is not suitable for outdoor use.
Waste connection to the condensate overflow pipe with use of a Tundish is
advisable.
Weight (kg)
Inc. full tank
To Next Page
Loading...
