E-series AC Charger
Configuration manual V1.3 2
1 Introduction
This manual mainly introduces E-series AC charger of LINCHR, and guides installation
and commissioning. Please read the instructions carefully before use, and follow the
relevant steps of the instructions.
E-series AC charger is a smart charger series, it has four models to meet your different
using. The E-series AC charger has 6 digital tubes display and 4 state indicator lights，
which invisible under the front cover when there is no need to display，when at the
charging mode it can easily to read out the charging information from the charger. The
appearance of the E-series charger has the strong future and technical feeling. it has a
halo atmosphere lamp surround the charger. It can connect to TN, TT, IT（Only single-
phase） power supply system to meet lots of application scenarios, very suitable for
household or charging station.
E-series smart charger can run offline or online. When running offline, you can query
and configure the charging parameters through the AP's WLAN-assisted AP mode. You
can easily check the current running status of the charger, historical charging records,
and fault occurrence records. When running online, the E-series smart charger supports
the OCPP1.6 protocol. It can easily connect to the operator's server through the Internet
to configure parameter settings, such as load balancing and reading charging data.
To Next Page
Loading...