Need help?Do you have a question about the Lincoln Electric CV 425 and is the answer not in the manual?
General| Input Phase | 3 |
|---|---|
| Frequency | 60 Hz |
| Rated Output | 425 A |
| Duty Cycle | 60% |
| Processes | MIG, Flux-Cored |
Explains critical warnings and the meaning of safety symbols used in the manual.
Details risks of electric shock, high voltage, EMF, and proper electrical handling.
Covers health risks from fumes, gases, arc rays, and fire/explosion hazards.
States compliance with European Community Directives for the equipment.
Advises on proper placement, ventilation, and environmental conditions for reliable operation.
Explains duty cycle, thermal protection, and factors affecting overheating.
Details how to connect the machine to the power supply, including voltage selection.
Describes the power switch, indicators, output sockets, and voltmeter switch on the front panel.
Details fuses, plugs, cooler socket, circuit breaker, and power lead connections on the rear panel.
Guides on how to connect welding cables to the correct output sockets.
Explains the machine's protection against overheating, overload, and short-circuits.
Emphasizes safety during maintenance and recommends authorized service for repairs.
Covers daily checks and periodic cleaning/tightening for optimal performance.
Provides instructions on how to safely lift and transport the welding machine.
Explains how to identify and minimize electromagnetic disturbances from the machine.
Details EMC compliance and necessary power supply characteristics for correct operation.
Lists input voltage, power, frequency, and phase requirements for the welding machines.
Details the output current, voltage, and welding ranges for CV 425 and CV 510.
Provides recommendations for input cable/fuse sizes and physical dimensions of the machines.
Outlines operating humidity, temperature, and storage temperature requirements.
Instructs on the proper disposal of electrical equipment according to WEEE directive.
Guides on how to read and use the spare parts list and illustrations.
Lists optional accessories such as cables, kits, and cooler units for the welding machines.
To Next Page