To Next PageTo Next Page
Need help?Do you have a question about the Lincoln Electric FlexCut 125 and is the answer not in the manual?
General| Output Current Range | 20 - 125 A |
|---|---|
| Gas Pressure | 60 - 80 psi |
| Pilot Arc | Yes |
| Dimensions (H x W x D) | 14.5 x 6.5 x 12.5 in (368 x 165 x 318 mm) |
| Gas Supply | Compressed Air or Nitrogen |
| Maximum Cut Capacity | 1/2 in |
| Duty Cycle | 60% |
Emphasizes reading the manual and exercising caution for safe operation.
Details PPE, fume control, and arc ray protection needed for safe operation.
Critical safety procedures to prevent electric shock, fires, and explosions.
Precautions for handling compressed gas cylinders to prevent explosions.
Describes the FLEXCUT™ 125 as a constant current plasma cutting power source.
Highlights key features and benefits of the FLEXCUT™ 125 system.
Details electrical, gas, and physical specifications for the Flexcut 125.
Procedures and warnings for connecting the plasma cutter to the power supply.
Specifications and recommendations for the compressed air or nitrogen supply.
Identifies controls, display, and modes for operating the Flexcut 125.
Tables for settings and procedures for cutting various materials and thicknesses.
Guidelines for maximizing consumable life and achieving good cut quality.
Recommended daily and monthly procedures for maintaining the equipment.
Instructions on how to identify and resolve machine malfunctions using the guide.
Schematic showing electrical connections within the Flexcut 125.
Lists major sub-assemblies with part numbers and descriptions.
