25 Lb. (11.3kg)
Diameter 12.5 Lb. (5.7kg) 25 Lb. (11.3kg) Plastic Spool in
in. (mm) Plastic Spool Plastic Spool Vacuum Sealed Bag
1/16 (1.6) ED030933 ED030934 ED031576
.072 (1.8) ED031030 ED031577
Conformance
Welding Positions
1G
2F
2G
3G
➔
4G
5G
➔
Allowable exposure per
Appendix D of FEMA 353
4 Weeks
1/16”
DIAMETERS/PACKAGING
Innershield
®
NR-233
Self-Shielded Flux-Cored Wire
(AWS A5.20-95: E71T-8)
Advantage Lincoln
User Friendly
Typical Applications
• Vertical up fillet and groove welds
• Overhead fillet and groove welds
• Seismic structural steel erection
• General structural steel erection
• Barge fabrication
AWS A5.20-95: E71T-8
ASME SFA-5.20; E71T-8
Publication C3.2000.3 9/05
www.lincolnelectric.com
CORED WIRE
3F
➔
1F
Note: Appendix D of FEMA 353 allows
additional exposure beyond the
24 hour limit.
NR-233 is an advanced technology, self-shielded flux-cored electrode
designed for high deposition rate welding - even when welding
out-of-position in seismic and non-seismic structural steel applications.
It is also great for fillet welding for ship and barge fabrication. The elec-
trode is welder-friendly, making it easier to pass tough qualification
tests and deposit great looking beads. It does all this while delivering
Charpy V-Notch properties that meet many of the more stringent codes
and specifications for seismic applications.
4 Weeks
.072”
• For the engineer: meets the stringent codes and standards for
Charpy V-Notch properties, such as those listed in FEMA 353.
• For the plant superintendent: higher deposition rates mean
faster building erection, quicker launch of the barge, or more
throughput in fabrication. In short: less cost and more profit.
• For the welder: a more forgiving arc with greater penetration
makes it easier to pass qualification tests, and makes for bet
ter quality welds in production — and the welds look great.
• NR-233 has been formulated to minimize gas marking, even
after the electrode has been exposed to the atmosphere.
To Next Page
Need help?
General
