Lincoln Electric IDEALARC AC-1200 User Manual

IDEALARC AC-1200
!#!J"I$

October, 2010
"*/.<A.8.6-;76'7=
Lincoln arc welding and cutting
equipment is designed and built
with safety in mind. However,
your overall safety can be
increased by proper installation ...
and thoughtful operation on your
part. #"#!
# ! !!#"  $
# &#$# !
#" $  #
"#' !$#" 
##!$$# And,
most importantly, think before you
act and be careful.
For use with machines having Code Numbers 10291C, 10292C, 10465 and 10466.
"2604.1*;.%*:2*+4.%74<*0.7?.:"7=:,.7:=<75*<2,&.4-260
>
• Sales and Service through Subsidiaries and Distributors Worldwide •
Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com
• World's Leader in Welding and Cutting Products •
Copyright © Lincoln Global Inc.

Lincoln Electric IDEALARC AC-1200 Specifications

General

Brand	Lincoln Electric
Model	IDEALARC AC-1200
Category	Welding Accessories
Language	English

Summary

WELDER OVERVIEW AND SAFETY

Safety Depends on You

Emphasizes user responsibility for safe operation and the importance of reading the manual.

SAFETY HAZARDS AND WARNINGS

Electrical and EMF Hazards

Details risks associated with electric shock and electromagnetic fields, including pacemaker warnings.

Fumes and Gases Hazards

PROTECTIVE MEASURES AGAINST HAZARDS

Electric Shock Protection

Provides detailed measures to prevent electric shock, including specific equipment recommendations.

Arc Rays and Fumes Protection

FIRE, EXPLOSION, AND CYLINDER SAFETY

Fire and Explosion Prevention

Addresses risks of fire and explosion from welding sparks and hot materials, with preventative measures.

Compressed Gas Cylinder Safety

INSTALLATION - LOCATION AND INPUT

INPUT WIRING

INSTALLATION - OUTPUT AND DUTY CYCLE

OPERATION PROCEDURES

OPERATIONAL SAFETY GUIDELINES

Outlines critical safety measures to be observed before and during the operation of the welding equipment.

SET THE OUTPUT CURRENT

MAINTENANCE PROCEDURES

MAINTENANCE SAFETY GUIDELINES

Emphasizes crucial safety measures before performing any maintenance tasks on the welding equipment.

TROUBLESHOOTING GUIDE

HOW TO USE TROUBLESHOOTING GUIDE

TECHNICAL DIAGRAMS

AC-1200 WIRING DIAGRAM - CODES 10465 & 10466