Need help?Do you have a question about the Lincoln Electric Invertec 170S and is the answer not in the manual?
General| Input Voltage | 120/230 V |
|---|---|
| Input Phase | Single Phase |
| Output Current Range | 5 - 170 A |
| Open Circuit Voltage | 70 V |
| Process | Stick, TIG |
| Efficiency | 85% |
| Output Range | 5 - 170 A |
| Rated Output (230V) | 170 A at 26 V |
| Rated Output (120V) | 90 A at 22 V |
| Rated Output | 170 A |
| Input Current @ Rated Output | 20A |
| Electrode Size | Up to 1/8 in. (3.2 mm) |
Details gas consumption for TIG welding processes, including Helium and Argon.
Covers general warnings, instruction comprehension, and personal protection.
Addresses electrical shock hazards, power equipment safety, and EMF effects.
Details CE compliance and optical radiation safety requirements.
Explains dangers from fumes, gases, and arc rays, and protective measures.
Highlights risks from welding sparks, hot materials, and fire hazards.
Covers compressed gas cylinder safety and hazards from moving parts.
Indicates suitability for environments with increased electrical shock hazard.
Provides advice on machine placement, environmental conditions, and ventilation.
Details voltage, phase, frequency checks, and grounding requirements.
Explains connection for Stick (MMA) and TIG welding with polarity.
Describes the self-test sequence and the Power ON/OFF, Thermal, and VRD LEDs.
Details the Output Current Knob and other controls on the front panel.
Guidelines for cleaning, cable inspection, and general maintenance.
Lists common error conditions and steps to resolve them.
Information on Lincoln Electric's support, advice, and warranty policies.
To Next Page
