Lincoln Electric INVERTEC V200-T User Manual

INVERTEC V200-T
®
OPERATOR’S MANUAL
IM592
November, 1999
Safety Depends on You
Lincoln arc welding and cutting
equipment is designed and built
with safety in mind. However, your
overall safety can be increased by
proper installation ... and thought-
ful operation on your part. DO
NOT INSTALL, OPERATE OR
REPAIR THIS EQUIPMENT
WITHOUT READING THIS
MANUAL AND THE SAFETY
PRECAUTIONS CONTAINED
THROUGHOUT. And, most
importantly, think before you act
and be careful.
For use with machines having Code Numbers:
10463
• Sales and Service through Subsidiaries and Distributors Worldwide •
Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com
• World's Leader in Welding and Cutting Products •

Lincoln Electric INVERTEC V200-T Specifications

General

Brand	Lincoln Electric
Model	INVERTEC V200-T
Category	Welding System
Language	English

Summary

Safety Warnings

California Proposition 65 Warnings

Specific warnings regarding hazardous substances in exhaust.

Arc Welding Hazards

General warnings about arc welding risks like injury or death.

Engine Powered Equipment Safety

Electrical and Environmental Safety

Electrical Shock Hazards

Critical warnings about preventing electric shock during operation.

Arc Ray Protection

Precautions to protect against burns from arc rays.

Fumes and Gases Dangers

Warnings about hazardous fumes and gases produced during welding.

Fire, Explosion, and Cylinder Safety

Fire and Explosion Risks

Safety measures to prevent fires and explosions from welding sparks.

Compressed Gas Cylinder Safety

Guidelines for safe handling and storage of gas cylinders.

Electrically Powered Equipment Safety

Maintenance Procedures

Maintenance Safety Precautions

Critical safety warnings before performing maintenance.

Capacitor Discharge Procedure

Procedure to safely discharge internal capacitors.

Troubleshooting

Using the Troubleshooting Guide