Need help?Do you have a question about the Lincoln Electric INVERTEC 300 TP and is the answer not in the manual?
General| Input Phase | 3 |
|---|---|
| Input Frequency | 50/60 Hz |
| Output Current Range | 5 - 300 A |
| Duty Cycle | 60% at 300 A |
| Efficiency | 85% |
| Power Factor | 0.93 |
| Protection Class | IP23 |
| Output Voltage Range | 10 - 22 V |
| Rated Output | 300 A at 32 V |
| Processes | TIG, Stick |
Guidelines to minimize electromagnetic disturbances generated by the machine.
Explanation of warning symbols and essential precautions for safe operation.
Details risks like electric shock, fumes, arc rays, and sparks during welding.
Specifies environmental and operational requirements for reliable machine use.
Details correct procedures for connecting the machine to the power supply.
Explains how to navigate menus and use controls for welding parameters.
Details trigger modes, pulse, and weld sequence configurations for GTAW welding.
Explains options for initiating the TIG arc, such as Touch Start and High Frequency.
Describes Soft, Crisp, Manual, and Pulse modes for SMAW welding.
Configuration of arc characteristics like Arc Force and Hot Start for SMAW.
Daily and periodic checks, cleaning, and inspections for machine upkeep.
Safe method to discharge high-voltage capacitors before internal maintenance.
Explains the function of the input power stage and EMI filtering.
Describes DC to AC high frequency conversion for welding output.
Details the role of the control board and user interface in machine operation.
Step-by-step guide for diagnosing machine problems effectively.
Lists common issues, checks, and recommended actions for repair.
Procedures for removing outer panels and safely discharging internal capacitors.
Steps to remove EMI Filter, Preload, Input Rectifier, Inverter/Output, and Aux Power boards.
Procedures for removing Control Board, UI-TFT, HF Board, ON/OFF Switch, and Gas Solenoid.
Steps for removing and replacing the machine's cooling fans.
To Next Page