Lincoln Electric POWER FEED 84 DUAL User Manual

Operator’s Manual
POWER FEED 84
Register your machine:
www.lincolnelectric.com/registration
Authorized Service and Distributor Locator:
www.lincolnelectric.com/locator
IM10178-E | Issue D ate July-16
© Lincoln Global, Inc. All Rights Reserved.
For use with machines having Code Numbers:
Power Feed 84: 11986, 11987, 11988,
11989, 11990, 11991, 11993, 11994,
11996, 11997, 11998, 12274, 12275,
12276, 12277, 12278, 12279, 12280,
12281, 12282, 12283, 12284, 12517,
12520, 12521, 12522, 12523, 12524,
12525, 12526, 12527, 12528, 12529,
12530, 12578
Power Feed 84 Dual: 12108, 12109,
12110, 12111, 12112, 12113, 12115,
12116, 12285, 12286, 12287, 12288,
12289, 12290, 12291, 12292, 12518,
12578, 12531, 12532, 12533, 12534,
12535, 12536, 12537, 12538, 12579
Power Feed 84 U.I. Control Box:
12177, 12178, 12179
POWER FEED 84 SINGLE
POWER FEED 84 DUAL
POWER FEED 84 U.I. CONTROL BOX
Save for future reference
Date Purchased
Code: (ex: 10859)
Serial: (ex: U1060512345)

Lincoln Electric POWER FEED 84 DUAL Specifications

General

Input Phase	1
Input Frequency	50/60 Hz
Input Voltage	42 VAC
Wire Feed Speed Range	50-700 IPM
Wire Diameter Range	0.023-1/16 in

Summary

Safety Precautions

General Safety Guidelines

Covers essential safety practices, PPE, fume control, and general warnings.

Specific Hazard Information

Details on hazards like electric shock, arc rays, fumes, fire, cylinders, and EMF.

California Proposition 65 Warnings

Installation

Technical Specifications

Installation Safety Guidelines

Provides safety instructions specific to the installation process.

Operation

User Interface and Controls

Explains the layout, displays, knobs, and buttons for controlling the feeder.

Weld Mode Selection and Wave Control

Trigger Operation Modes

Procedure and Memory Management

Covers dual procedures, saving/recalling memories, and using USB for data transfer.

User Defined Parameters

Configurable settings for wire speed, polarity, USB, and system options.

Maintenance

Safety and Routine Checks

Periodic Maintenance Procedures

WFS Calibration

Troubleshooting

Troubleshooting Guide Usage

Problem Identification and Solutions