Lincoln Electric Precision TIG 225 User Manual

• Sales and Service through Subsidiaries and Distributors Worldwide •
Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com
• World's Leader in Welding and Cutting Products •
OPERATOR’S MANUAL
IM895
May, 2007
Safety Depends on You
Lincoln arc welding and cutting
equipment is designed and built
with safety in mind. However, your
overall safety can be increased by
proper installation ... and thought-
ful operation on your part. DO
NOT INSTALL, OPERATE OR
REPAIR THIS EQUIPMENT
WITHOUT READING THIS
MANUAL AND THE SAFETY
PRECAUTIONS CONTAINED
THROUGHOUT. And, most
importantly, think before you act
and be careful.
For use with machines having Code Numbers:
Copyright © 2007 Lincoln Global Inc.
PRECISION TIG 225
11317, 11318, 11319
(11320 Ready-Pak)
(11321 Ready-Pak w/Cart)
IP 21S

Lincoln Electric Precision TIG 225 Specifications

General

Input Phase	Single Phase
Output Current Range (TIG)	5-225A
Processes	TIG, Stick
High Frequency Start	Yes
Pulse Frequency	0.5 - 200 Hz
AC Balance Control	Yes
Up Slope/Down Slope	0 - 10 sec
Rated Output	225 A
Input Current @ Rated Output	230V
Post Flow Timer	25 sec
Pre Flow Timer	0