To Next PageTo Next Page
Need help?Do you have a question about the Lincoln Electric PRO-MIG 175 IM810 and is the answer not in the manual?
General| Input Voltage | 230 V |
|---|---|
| Input Phase | Single Phase |
| Amperage Range | 30 - 175 A |
| Output Current Range | 30 - 175 A |
| Input Current @ Rated Output | 20A |
| Duty Cycle | 30% at 130 A |
| Welding Thickness | Up to 5/16" (8mm) |
| Wire Size Range | .025-.035 in. (0.6-0.9 mm) |
Details on how electric shock can kill and precautions to prevent it.
Explains that arc rays can burn and details how to protect against them.
Discusses the dangers of welding fumes and gases and how to avoid them.
Warns about sparks and spatter causing fires and explosions, with precautions.
Covers safe handling and storage of compressed gas cylinders to prevent explosions.
Outlines safety steps for electrically powered equipment during installation and operation.
Essential safety rules to follow before and during installation.
Detailed procedure for threading welding wire through the machine.
Step-by-step guide on how to perform a weld using the machine.
Explanation of the machine's overload protection features.
Details on the thermal protector that shuts down the machine when overheated.
Tables and guidance for setting welding parameters for different materials and thicknesses.
Important safety measures to observe before performing maintenance.
Lists common output-related problems and their potential causes and solutions.
Addresses issues related to wire feeding, including drive roll and liner problems.
Discusses problems related to arc instability and poor starting, with solutions.
