Lincoln Electric Pro-MIG 140 User Manual

Pro-MIG 140
MANUAL DEL OPERADOR
OPERATOR’S MANUAL
IM884
April, 2006
For use with machine Code Number:
Para el uso con número del código automático:
Pro-MIG™ 140
• Sales and Service through Subsidiaries and Distributors Worldwide •
TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com
• World's Leader in Welding and Cutting Products •
Copyright © 2006 Lincoln Global Inc.
™
Safety Depends on You
Lincoln arc welding and cutting equipment
is designed and built with safety in mind.
However, your overall safety can be
increased by proper installation ... and
thoughtful operation on your part. DO NOT
INSTALL, OPERATE OR REPAIR THIS
EQUIPMENT WITHOUT READING THE
OPERATORS MANUAL WHICH IS PRO-
VIDED WITH YOUR MACHINE AND THE
SAFETY PRECAUTIONS CONTAINED
THROUGHOUT. And, most importantly,
think before you act and be careful.
La seguridad depende de usted
El equipo de soldadura por arco y corte de
Lincoln está diseñado y construido teniendo
en mente la seguridad. Sin embargo, la
seguridad general puede ser mejor si instala
y opera la máquina adecuadamente.
NO
INSTALE, NO PONGA EN FUN-
CIONAMIENTO NI REPARE ESTE EQUIPO
SIN LA LECTURA DEL MANUAL DE LOS
OPERADORES QUE SE PROPORCIONA
CON SU MÁQUINA Y LAS MEDIDAS DE
SEGURIDAD CONTENIDAS EN EL MISMO.
Lo más importante, piense antes de actuar
y tenga cuidado.
}
11288

Lincoln Electric Pro-MIG 140 Specifications

General

Brand	Lincoln Electric
Model	Pro-MIG 140
Category	Welding System
Language	English

Summary

Safety

Electrical Safety Precautions

Safety measures for electrically powered equipment.

Arc Rays Safety

Precautions for arc rays causing burns.

EMF Safety

Safety precautions for electric and magnetic fields.

Welding Sparks Safety

Precautions against sparks causing fire or explosion.

Electric Shock Safety

Warnings and precautions regarding electric shock.

Fumes and Gases Safety

Cylinder Safety

Installation

Technical Specifications

Installation Safety Precautions

Safety warnings during installation procedures.

Cylinder Safety Precautions

Warnings about cylinder handling and gas buildup.

Input Connections and Code Compliance

Operation

Detailed Controls and Settings

Welding Operations and Wire Loading

Welding, Cleaning, and Guidelines

Process Specifics and Protection

Maintenance

Maintenance Safety Precautions

Safety warnings before performing maintenance.

Routine Maintenance Tasks

Component Replacement Procedures

Tip and Drive Roll Replacement

Liner Replacement

Troubleshooting

How to Use Troubleshooting Guide

Instructions for using the troubleshooting section.

Output Problems

Troubleshooting steps for output issues.

Feeding and Gas Flow Problems

Welding Problems

Troubleshooting steps for welding quality issues.