Lincoln Electric RANGER 10,000 PLUS User Manual

RANGER 10,000 PLUS
AND RANGER 10,000
LINCOLN
ELECTRIC
OPERATOR’S MANUAL
For Machines with Code Number 11394, 11395, 11398
IM925
January, 2007
Safety Depends on You
Lincoln arc welding and cutting
equipment is designed and built
with safety in mind. However, your
overall safety can be increased by
proper installation ... and thought-
ful operation on your part. DO
NOT INSTALL, OPERATE OR
REPAIR THIS EQUIPMENT
WITHOUT READING THIS
MANUAL AND THE SAFETY
PRECAUTIONS CONTAINED
THROUGHOUT. And, most
importantly, think before you act
and be careful.
R
• Sales and Service through Subsidiaries and Distributors Worldwide •
Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com
• World's Leader in Welding and Cutting Products •
Copyright © 2007 Lincoln Global Inc.
C US
®

Lincoln Electric RANGER 10,000 PLUS Specifications

General

Model	RANGER 10, 000 PLUS
Output	10, 000 watts
Auxiliary Power	10, 000 watts
Fuel Type	Gasoline
Max Output Amperage	250 A
Voltage	120/240V AC
Welding Process	Stick, TIG

Summary

Safety Guidelines

Hazard Warnings

Covers Proposition 65, EMF, arc welding, and engine exhaust hazards.

Electrical, Fire, and Cylinder Safety

Details on preventing electric shock, fires, explosions, and safe cylinder handling.

Installation and Specifications

Technical Specifications

Key specs for Ranger 10,000 Plus and 10,000 models, including engine and output data.

Installation Procedures

Guidance on grounding, towing, mounting, cable connections, auxiliary power, and premises wiring.

Operation

Controls, Settings, and Fuel Consumption

Explanation of welder controls, range/polarity settings, and engine fuel usage.

Welding Process Guide

Instructions for Stick, TIG, Wire Feed welding, and Arc Gouging procedures.

Maintenance and Troubleshooting

Engine Maintenance and Care

Steps for routine maintenance, oil changes, air filter, spark plugs, and battery checks.

Troubleshooting Common Issues

A guide to diagnose and resolve typical machine malfunctions and operational problems.