To Next PageTo Next PageWhat to do if my Lincoln Water Pump fails to prime?
If your Lincoln Water Pump fails to prime, there are several potential causes. First, the Footvalve ball may not be sealing. Remove and clean the footvalve, then reassemble it using Pipe Sealant on the threads. Second, the Piston Valve could be damaged and not seating properly; replace the Piston and Piston Rod Assembly. Finally, the O-Ring might not be sealing; if so, replace the O-Ring.
Why is my Lincoln 1335 Water Pump so hard to pump?
If your Lincoln Water Pump is hard to pump, it could be due to a few reasons. First, the Gland Nut might be screwed down too tight; try adjusting it. Second, the handle might be in the wrong position for the fluid you're pumping; adjust the Handle Position. Lastly, a bent Piston Rod could be the culprit; in this case, replace the Piston Rod and Piston Assembly.
General| Brand | Lincoln |
|---|---|
| Model | 1335 |
| Category | Water Pump |
| Language | English |
Warning: Not for use with gasoline or other flammable liquids.
Do not alter equipment; ensure pump and area are grounded.
Avoid static sparking, stop use if shock occurs; tighten fluid connections.
Follow manufacturer fluid recommendations and use protective clothing.
Check equipment regularly and repair or replace worn/damaged parts immediately.
One-year warranty against defects, excluding damage from misuse, accident, or unauthorized repair.
Details 2-year and 5-year warranties for specific series like SL-V, bare pumps, and oil meters.
