Lincoln 83754 - User Manual

Page
Section
- E35
- 71B
Form 402153
DEC - 2006
Specifications
• Spring driven, automatic rewind, with locking ratchet mechanism (eight locking positions per revolution).
• Brass connectors on hose and reel
MODEL 83753 3/8” AIR HOSE REEL
MODEL 83754 1/2” AIR HOSE REEL
Model 83753
• 50 Feet of 3/8” Hose
275172 Hose ©
• Incoming Air Connection: 1/4” NPT
275174 Swivel ©
• Hose Connections: Male 1/4” NPT
• Maximum Pressure: 300 PSI
• Maximum Air Flow: 25 CFM
•
•
Model 83754
• 50 Feet of 1/2” Hose
275173 Hose ©
• Incoming Air Connection: 1/2” NPT
275175 Swivel ©
• Hose Connections: Male 1/2” NPT
• Maximum Pressure: 300 PSI
• Maximum Air Flow: 35 CFM
•
•
Read and understand entire manual before assembling or using hose reel. Failure to follow instructions or warnings could
result in personal injury and/or property damage.
Installing Hose Reel©
Note: Mounting hardware is not included and must be purchased separately. Decide
first where reel will be mounted before purchasing hardware. Different mounting posi-
tions require different types of hardware.
Reel can be mounted on the floor, ceiling, or wall, wherever it is convenient. When
choosing a location, remember that you can only mount reel to a load-bearing struc-
tural member capable of supporting combined weight of reel, hose, and forces caused
by pulling or maneuvering hose. Generally, mounting reel near air compressor is best
since you can connect the two with a shorter, less expensive length of hose. Also, air
compressor controls will be nearby for convenient adjusting.
Once you have located a mounting spot, consult the “Typical Mounting Positions”
chart below and choose the diagram that most closely matches your mounting posi-
tion. If necessary, adjust guide arm position to match diagram.
Safety Rules
DO NOT EXCEED 300 PSI incoming air pressure (from compressor).
2. Wear impact-resistant eye protection that meets ANSI Spec. Z87.1 in work area at all times.
Do not release hose when rewinding. Hold hose end and allow hose to rewind slowly.
Never allow children to use hose reel. Keep children clear of work area at all times.
© Indicates change

Summary

Product Specifications

Model 83753

Specifications for the 3/8" air hose reel, including hose length, connections, pressure, and airflow.

Model 83754

Specifications for the 1/2" air hose reel, including hose length, connections, pressure, and airflow.

Safety Rules

Important Warnings

Critical safety instructions for operating the hose reel, covering pressure limits, eye protection, and safe rewinding.

Installing Hose Reel

Typical Mounting Positions

Diagrams illustrating wall, floor, and ceiling mounting options and guide arm adjustment.

Operating Hose Reel

Hose Pulling and Locking

Instructions for pulling hose to desired length and locking the reel mechanism using clicking sounds.

Hose Retraction

Guidance on safely retracting the hose onto the reel, ensuring it does not detach.

Adjusting Recoil Tension

Tension Adjustment Procedure

Steps to adjust spring tension by rewinding the drum clockwise to increase or counterclockwise to decrease.

Replacing Hose

Hose Replacement Steps

Detailed procedure for removing old hose and installing a new hose, including connections and clamps.

Lincoln Industrial Standard Warranty

Limited Warranty (1 Year)

Covers defects in material and workmanship for one year from purchase date, excluding damage from misuse.

Special Limited Warranties

Details 2-year warranty for SL-V Injectors and 5-year warranty for specific pump and reel series.

Lincoln 83754 Specifications

General

Brand	Lincoln
Model	83754
Category	Cables and connectors
Language	English