Page
Section
- E35
- 40N
Form 403733
MAR - 2008
MODEL 84275
BARE REEL
SERIES “E”
SPECIFICATIONS
Maximum working pressure 5000 p.s.i.
Material Inlet 1/2” NPT (Female)
Material outlet 1/2” NPT (Female)
Sheave width 10”
Sheave diameter 19-1/4”
Drum diameter 12-3/4”
Overall width 13-1/2”
Overall height 22-1/2”
Overall depth 21”
Maximum hose capacities (Including hang down):
3/8” I.D. Grease hose (SAE 100 R2) 75 ft.
1/2” I.D. Grease hose (SAE 100 R2) 75 ft.
1/2” I.D. Oil hose (SAE 100 R3) 75 ft.
5/8” I.D. Grease hose (SAE 100 R1) 75 ft.
NOTE: Maximum hose capacities are based on SAE
specied hoses. Exceeding these capacities voids war-
ranty.
Refer to DELIVERY HOSE INSTALLATION for proper hose
to reel assembly.
DESCRIPTION
Model 84275 Hose Reel is a spring operated unit designed
to hold and retract up to 75 ft. of 5/8” diameter hose, see
hole capacities chart.
The reel is a heavy duty unitl designed for bus and truck
lubrication or wherever extra heavy duty
construction and longer length delivery hose is required
. The reel can be installed as a single unit or in multiple
congurations.
Reel features include a reel latch that automatically locks
at desired positions as the hose is extended and releases
with a short pull on the hose.
OWNER/OPERATOR
RESPONSIBILITY
It is the owner/operator responsibility to properly use and
maintain this equipment.
The instructions and warnings contained in this manual
shall be read and understood by the owner/operator prior
to operating this equipment.
If an owner/operator does not understand English, the
contents of this manual shall be explained in the owner/
operator native language to assure the owner/operator
comprehends.
It is the owner/operator responsibility to maintain the leg-
ibility of all warning and instruction labels.
The owner/operator shall retain this manual for future ref-
erence to important warnings, operating and maintenance
instructions.
To Next Page
Need help?
General
