Lincoln LS 2002 - DATC System AUTO Temperature Balance; Driver Side Temperature Selection

DATC system AUTO temperature balance
Press and hold the AUTO control for about two seconds to equalize the
passenger set temperature with the driver side temperature. This feature
is useful when the driver is alone in the vehicle.
Driver side temperature selection
The display window indicates the selected temperature and manual
control of fan speed (
) if automatic fan speed is not desired.
To control the temperature, select any temperature between 19° C (65°
F) and 29° C (85° F) by pressing the temperature control on the driver
side of the system.
For continuous maximum cooling, press the temperature control until
16° C (60° F) is shown in the display window. The DATC will continue
maximum cooling (disregarding the displayed temperature) until a
warmer temperature is selected by pressing the temperature control. If
maximum cooling is selected, the passenger set point is not displayed
and the passenger temperature adjustments will be disabled.
For continuous maximum heating, press the temperature control until
32° C (90° F) is shown in the display window. The DATC will continue
AUTO
OFF
A/C
R
EXT
F C
F F
AUTO
OFF
A/C
R
EXT
F C
F F
Climate Controls
48