Linde H 50 D-03 User Manual

Service Training
This training material is only provided for your use and remains the exclusive property of
LINDE MATERIAL HANDLING
Linde IC-Engined Fork Truck
H 50/60/70/80 D/T
H 50/60/70/80 D-02/T-02
H 50/60/70/80 D-03/T-03
Type 353

Linde H 50 D-03 Specifications

General

Model	H 50 D-03
Category	Forklifts
Load Capacity	5000 kg
Lift Height	3200-7000 mm
Weight	7350 kg
Engine Type	Diesel
Transmission Type	Hydrostatic
Load centre of gravity	500 mm
Engine power	55 kW
Power Source	Diesel
Nominal load	5000 kg
Mast Type	Triplex

Summary

Section 4.1 Engine Drive

Engine Specifications (BF6M 1012 E)

Technical data for the BF6M 1012 E engine model, including displacement, power, and compression.

Adjusting Valve Clearance

Adjusting the Injection Valve

Instructions for checking and adjusting the opening pressure of the injection valve using shims.

Checking Compression Pressure

Procedure for checking engine compression pressure using a compressometer.

Engine Specifications (BF6M 2012)

Technical data for the BF6M 2012 engine model, covering power, compression, and speeds.

Checking Injection Nozzles

Procedures for checking injection nozzle leaks, buzzing, and spray patterns.

Section 4.2 Transmission

Schematic Diagram of the Drive

Hydraulic Circuit Diagram

Detailed schematic of the working hydraulics and steering control systems.

Troubleshooting Hydrostatic Transmission

Guidance for diagnosing and resolving issues within the hydrostatic transmission system.

Hydrostatic Travel Drive Troubleshooting

Diagnostic flowchart for issues related to the hydrostatic travel drive.

Section 4.9 LP Gas Model H 50/60/70/0, Type 353

Drive Engine Technical Data

Electronic Ignition System

Checking the Ignition Timing

Propellant Gas System Diagram

Adjusting the CO Content