Linde H 70 D-03 User Manual

Service Training
This training material is only provided for your use and remains the exclusive property of
LINDE MATERIAL HANDLING
Linde IC-Engined Fork Truck
H 50/60/70/80 D/T
H 50/60/70/80 D-02/T-02
H 50/60/70/80 D-03/T-03
Type 353

Linde H 70 D-03 Specifications

General

Model	H 70 D-03
Category	Forklifts
Load Capacity	7000 kg
Lift Height	3000 mm
Engine Type	Diesel
Transmission	Hydrostatic
Power Source	Diesel
Travel Speed	20 km/h
Drive	4-wheel drive

Summary

4.1 ENGINE DRIVE

4.1.1 ENGINE MODEL BF6M 1012 E

Technical data and maintenance for the BF6M 1012 E engine.

4.1.2 ENGINE MODEL BF6M 2012

Technical data and maintenance for the BF6M 2012 engine.

4.2 TRANSMISSION

4.2.1 HYDROSTATIC TRANSMISSION

Explanation of the hydrostatic transmission system, components, and operation.

4.2.2 OPERATION OF THE HYDROSTATIC TRANSMISSION

4.4 STEERING SYSTEM

4.4.1 POWER STEERING CIRCUIT DIAGRAM

4.4.3 STEERING AXLE REMOVAL

Step-by-step instructions for removing the steering axle.

4.4.4 STEERING AXLE REPAIRS

Details on various repair procedures for the steering axle.

4.5 CONTROLS

4.5.1 ACCELERATOR AND BRAKE PEDAL ADJUSTMENT

Procedures for adjusting the accelerator and brake pedals.

4.5.2 SPEED CONTROL

Instructions for adjusting and checking the speed control system.

4.5.4 START OF DRIVE WHEEL ROTATION

4.5.5 BRAKE SHAFT STOP SCREWS

4.5.6 SYMMETRY OF THE TRAVEL CONTROL

4.5.7 PRESSURE DIFFERENCE Δp

4.9 LP GAS MODEL H 50/60/70/0, TYPE 353

4.9.1 DRIVE ENGINE

Technical data and maintenance for the LP gas drive engine.

4.9.2 ELECTRICAL SYSTEM

Information on the electronic ignition and engine speed control systems.

4.9.3 PROPELLANT GAS SYSTEM

Description of the propellant gas system, including diagram and function.

4.9.4 INSPECTIONS AND ADJUSTMENTS

Procedures for inspecting and adjusting ignition system and engine speed control.