Need help?Do you have a question about the Linde V10 and is the answer not in the manual?
General| Nominal Load | 1000 kg |
|---|---|
| Load Centre c | 500 mm |
| Power Source | Electric |
| Battery Voltage | 24 V |
| Load Capacity | 1000 kg |
Before using the truck, inspect the work area. It should be neat, well lit, adequately ventilated...
At the beginning of each shift, inspect your truck by using the Linde Operator's Daily Checklist.
The operator compartment is raised and lowered by the mast. It should only be raised if the truck is stationary...
Lift truck tip-overs can cause serious injury or death. Following all safety rules when operating a lift truck is the best way to prevent injury.
When you are finished with the truck, observe proper shutdown procedures.
Batteries contain dissolved sulfuric acid, which is poisonous and caustic.
Oils are flammable! Always comply with applicable legal regulations.
This diagram illustrates the various controls for operating the lift truck.
This section covers procedures for unloading and preparing a new truck for initial service.
This section details the steps for safely switching the truck on and off.
This section explains how to operate the truck for forward and reverse travel.
This section describes the electric and electro-mechanical braking systems of the truck.
This section explains how to operate the main lift and auxiliary lift functions for forks and compartment.
This procedure explains the safe steps for changing the truck's battery.
This section outlines the procedure for connecting the truck's battery to an external charger.
This section describes how to manually lower the operator compartment in an emergency.
This section provides instructions and warnings for towing the truck.
This checklist details the items to be inspected daily for operational readiness.
This section provides guidance on diagnosing and resolving common technical issues.
This section provides a table of fault codes, their descriptions, responses, causes, and remedies.
To Next Page
