10
gure 10 A gure 10 B
WARNING: Do not tamper with or move the device while it contains water. Doing so could
result in water overowing from the tank.
14. PLASTIC TANK FILLING AND CONNECTION WITH BEER TANKS:
• Fill the plastic tank with liquid without chemical additives up to the MAX mark.
• Connect the device to the tank using the speed ttings.
Pour liquid here
WARNING: When the pumps are switched on, the water from the plastic tank will be
pumped into the external tank circuit, therefore it is necessary to add water to the plastic tank
before the circuit is completely lled.
NOTE: In the temperature range -6 to 0 ° C it is necessary to use an antifreeze solution.
We recommend using an ecological antifreeze liquid based on monopropylene glycol, which
is suitable as a heat transfer uid for all heating or cooling systems.
To Next Page
Loading...
