LINDR PYGMY 25 - User Manual

LINDR FLOW-THROUGH
CONTACT COOLER
Number 012-2020 REV00 Valid 2020-06-01
INSTRUCTION MANUAL
ENGLISH

Summary

General Safety Instructions and Warnings

General Operational Safety Guidelines

Key safety principles for using the beverage cooler.

Specific Safety Warnings

Important warnings regarding electrical hazards, coolant, and environment.

Installation and Placement Guidelines

Placement and Airflow Requirements

Electrical Connection and Safety

Power Connection Procedure

Steps for safely connecting the cooler to the power supply.

DANGER: Damaged Power Lead

Warning against using the device with a damaged power cord.

Tap Installation

Tap Installation Steps

Step-by-step guide for attaching the dispensing taps.

Keg Coupler Assembly and Connections

Outlet for Keg Pressurisation

Outlet for Beverage

Beverage Supply and Pressurisation Methods

Connection with Built-In Compressor (One-Tap)

Connection with CO2 Bottle (One-Tap)

Advanced Beverage Supply Connections

Connection with Built-In Compressor (Two-Tap)

Connection with Classic CO2 Bottle (Two-Tap)

Specific System Connections

KONTAKT 155;R CO2 Pressure Bottle Setup

Connecting and regulating the KONTAKT 155/R with a CO2 bottle.

Speed Fittings and Temperature Control

Temperature and Adjustment

How to set and adjust the beverage cooling temperature.

Tapping, Untapping, and Operation

Keg Tapping and Untapping Procedures

Step-by-step guides for tapping and untapping kegs with different couplers.

Putting into Operation

Troubleshooting and Malfunctions

Table of Malfunctions and Solutions

Common issues, their causes, and recommended removal steps.

LINDR PYGMY 25 Specifications

General

Cooling Capacity	20-25 L/h
Dimensions	330 x 240 x 425 mm
Weight	14.5 kg
Refrigerant	R290
Power	267 W
Voltage	220-240 V
Frequency	50 Hz
Material	Stainless Steel