LINDY CPU Switch Smart Installation and Use Page 26
Examples of common hotkey sequences (assuming CTRL + ALT hotkey option):
To select channel 2:
press
ED
release
ED
To ’tab through’ channels:
press
ED
Y
release
Y
press
Y
release
Y
press
Y
release
YED
3.5 Mouse control
Computers may conveniently be selected using a three button mouse. In order to
switch to the next computer simply hold down the central mouse button (the wheel
mouse button on an IntelliMouse) and click on the left hand mouse button to select
the next computer or the right hand mouse button to select the previous computer. If
the LINDY CPU Switch Smart has been set to scan active ports then the next or
previous active channel will be selected. If it has been set to scan all ports then the
next or previous numerical channel in sequence will be selected (see section 4.5 for
more details). Mouse switching may be enabled or disabled by setting options
during configuration (see section 4.3). When mouse switching is disabled the third
button or wheel button state is ‘passed through’ the LINDY CPU Switch Smart and
seen by the application software.
Hold down centre button ( )
Press and release left hand button
(
) to select next computer
Hold down centre button ( )
Press and release right hand button
(
) to select previous computer
To Next Page
Loading...
Need help?
General
