Line Seiki G48 Series - Program Mode Operation Guide; Program Item Selection and Setting; Specific Program Settings Overview

The output time will automatically become
if the output mode is different than
PROGRAM MODE OPERATION
Press to select program menu items. Press individual digit setting keys to change setting values.
Program Item
Program Item Display
Setting Values
Setting Key
Default Value
Count Speed
Input Mode
Count Mode
Output Mode
Output Time
Reset Mode
Prescale
Decimal Point Position
Write
Reset
Key Lock
(1 level preset)
(2 level preset)
(1 level preset
+ prewarn)
(1 level preset output)
(1st preset of 2 level preset model)
(prewarn output)
(2nd preset of 2 level preset model)
(main output of 1P+1PW model)
The output time will automatically become
if the output mode is different than
The output time will automatically become
if the output mode is different than
Only mode A can be set if the output mode is
different than
Mode E, F, G, can only be set if OUT or OUT 2
is programmed to one shot output.
Prescaler setting range : 0.001 ~ 99.999
Key 1 will select
the desired
protection level
Key 1 will select
the desired value
Press corresponding
numeric keys
Key 1 will
select decimal
point position
Keys 1 ~ 5 will
change the
corresponding
digits
Key 1 will select
the desired value
( Mode A )
Key 1 will select
the desired value
Keys 2 ~ 4 will
change digits
Key 1 will select
the desired value
Keys 2 ~ 4 will
change digits
Key 1 will select
the desired value
Keys 2 ~ 4 will
change digits
Key 1 will select
the desired value
Key 1 will select
the desired value
Key 1 will select
the desired value
Key 1 will select
the desired value
Key 1 will select
the desired value
Key 1 will select
the desired value
( Add )
( contact /
open collector )
IN Hz
IN
IN
OUT
OUT ms
OUT1 ms
OUT2 ms
PS
DP
W
RST ms
KEY/P
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
(Hz)
(ms)
(Level 1)
is contact/open collector input mode.
is voltage input mode.