Need help?Do you have a question about the Linear HSLG and is the answer not in the manual?
General| Brand | Linear |
|---|---|
| Model | HSLG |
| Category | Gate Opener |
| Language | English |
Warning type indicating potential mechanical hazards causing serious injury or death.
Warning type indicating potential electrical shock hazards causing serious injury or death.
Critical safety steps to follow before commencing gate operator installation.
Adjusting limit nuts to set the gate's open and close positions.
Wiring for open and close obstruction sensors, including entrapment behavior.
Connections for open, reverse, and shadow/reset loop detectors.
Installation layouts for photoeyes and gate edge sensors for safety.
Setting the current limit to detect obstructions during gate opening.
Setting the current limit to detect obstructions during gate closing.
Enabling access to advanced programming functions for specific configurations.
Setting the maximum duration the gate can operate before safety lockout.
Configuring the auxiliary relay for functions like maglock control or strobe activation.
Managing cycle counts, resetting alerts, and setting maintenance triggers.
Learning and deleting radio and MGT obstacle transmitters.
Configuring mid-travel stops, anti-tailgate, and radio receiver settings.
Preventing gate closing or opening based on shadow loop triggers.
Handling obstructions, reversals, and safety inputs for secure operation.
Controller lock-out due to repeated obstruction detection or maximum run time exceedance.
Detailed inspection points for clutches, brakes, belts, switches, and safety devices.
To Next Page
