linergo 4-MEM ECS Plus User Manual

1-5
User Manual for 4-MEM ECS+ Digital Handset Display.
This manual is a quick guide of the functionality of the 4-MEM ECS+ Digital Handset. This handset is
intended to be used with ROL ECS+ controlled systems only.
Mount the Handset Use the (2) attached screws for fixing the handset to the table top. If the thickness
of the table top is less than 18mm please use shorter screws.
Connect the Handset
Connect the handset to the "Handset'' port of the ECS+ box.
Handset Layout
Display Layout
Menu mode Imperial, inch
M Memory Thermometer
E Error codes Metric, centimeter
Reset

linergo 4-MEM ECS Plus Specifications

General

Screen Size	3.5 inch
Resolution	320 x 240
Aspect Ratio	4:3
Storage Temperature	-20°C to 60°C
Operating Temperature	0°C to 40°C

Summary

Connect the Handset

Handset Layout

Details the physical arrangement of the handset's display, buttons, and connection ports.

Display Layout

Explains the meaning of icons, modes, and units shown on the digital display.

System Operation and Settings

Sleep Mode

Puts the display to sleep after inactivity; wake with arrow buttons.

Start Up Procedure

Initial table setup and calibration process with reset symbol display.

Settings Menu Options

Lists available options within the settings menu for configuration.

Error Management and Codes

Error Log Details

Provides explanations for error codes and log entries.

Error Codes

Lists specific error codes and their meanings for troubleshooting.

Calibration and Configuration

Calibration (CAL)

Adjusts the default height to the actual measured height.

Setting Memory Buttons

Programs and recalls saved height positions.

Reset Function (rES)

Forces the system into a reset mode for recalibration.