Need help?Do you have a question about the Linergy Spy Center Basic Series and is the answer not in the manual?
General| Brand | Linergy |
|---|---|
| Model | Spy Center Basic Series |
| Category | Power Supply |
| Language | English |
General safety warnings and precautions during use.
Information on product compliance with environmental management systems.
Guidelines for the proper disposal of hazardous materials.
Explanation of how the double conversion system functions.
Lists the specific models covered by this manual.
Explanation of symbols used on the CPS during operation.
List of items included in the CPS package.
Procedure for checking the unit for transport damage.
Warnings regarding installation, polarity, and tool usage.
Steps for making ground and output line connections.
Instructions for connecting the Emergency Power Off switch.
Formula for calculating necessary air ventilation for battery compartments.
Practical example of airflow calculation for VRLA batteries.
General rules for installing the central unit and battery box.
Recommendations for optimal placement and environment.
Visual guide on proper and improper battery box placement.
How temperature affects lead-acid battery lifespan.
Reference to EN 50272-2 for battery ventilation.
Details on battery type, charging, and lifespan.
Procedure for replacing batteries with new ones.
Critical safety measures for working with batteries.
Diagram and labels for SCB010 rear panel connections.
Diagram and labels for SCB020/SCB030 rear panel connections.
Schematic illustrating power and battery connections.
Explanation of EPO, cable requirements, and wiring diagrams.
Step-by-step guide for connecting the battery box to the CPS.
Crucial advice on connecting battery terminals correctly.
Procedure for powering on the CPS when AC power is present.
Procedure for powering on the CPS when AC power is absent.
Instructions for safely shutting down the CPS unit.
Steps to turn off the CPS when connected to the grid.
Steps to turn off the CPS when operating on battery power.
Meaning of the red FAULT LED flashing.
Reference table for warning and error codes.
Overview of the CPS display screen elements.
Explanation of ON/MUTE, SELECT, and OFF/ENTER buttons.
Description of POWER, WARN, and FAULT LED status.
Detailed function of the OFF button.
Understanding BY PASS, LINE, BATTERY, and INV indicators.
Describes normal operation with mains and inverter.
Details on operating the CPS solely on battery power.
Explanation of the bypass circuit function.
Description of the CPS standby state.
Overview of RS 232 and expansion slot.
Examples of optional communication cards.
Details on the SCBMOD module for alarms.
Using SCBLAN for network monitoring.
Overview of the SCBMOD reporting form.
Local LED status and remote signaling.
Using contacts for remote status monitoring.
Description of the Power Manager monitoring interface.
Key functionalities of the Power Manager software.
What the SCBLAN device is and its purpose.
Supported network protocols and speeds for SCBLAN.
Table of situations, their meanings, and remedies.
Actions to resolve common CPS problems.
Details required when calling for service.
How altitude affects CPS performance.
List of relevant CE safety and EMC standards.
Overview of order codes and battery types.
Details on nominal power, active power, and autonomy.
Physical dimensions for system and battery cabinets.
Table correlating input voltage with models.
Recommendations for input protection sizing.
Specifications for VA rating and input voltage ranges.
Details on output voltage, rate, and frequency ranges.
Handling of overloads and efficiency ratings.
Battery numbers, dimensions, and weight.
Operating environment and management interfaces.
To Next Page