Linergy Spy Center Basic Series - Display LCD and Controls; LCD Screen Layout; Button Functions; LED Indicators

16
1
2
3
4
5
6
Function
1
Led machine on signaling, indicating that the CPS is ON
2
3
4
ON / MUTE button: inverter power button
5
7
WARN: if flashing indicates that the machine is not ensured continuity of electric current in the case of
blackouts. Inverter off.
FAULT: red LED signaling faults or danger. Flashing indicates that the
battery circuit is open or broken.
If the CPS were in emergency flashes when there is a situation of batteries too low and is reaching the
complete shutdown of the CPS
SELECT: Allows you to scroll the display information: battery level, load applied, system status
CHAPTER 5
DISPLAY LCD
8 9 10