20
With RS 232 can be connected to the display optional module was "SCBMOD
Code" which provides a series of dry contact normally open exchange, to manage
the states of the rescuer alarms. This kit from the possibility of associating fi up to 5
reports.
The option board SNMP SCBLAN code allows you to monitor the operating
status directly via PC or by connecting to the Ethernet network
CHAPTER 7
COMMUNICATION PORTS
In the rear part of the CPS (see CPS Views) are present the following communication ports:
RS 232 - Power Manager
Expansion slot for additional communication cards
INTELLIGENT SLOT
The UPS comes with an expansion slot for optional communication cards (see fi gure on right)
which allow the device to communicate using the main communication standards. Some
examples:
AS 400 comes standard
Ethernet network card with TCP / IP, HTTP and SNMP code Ethernet network card with TCP / IP, HTTP and SNMP code
SCBLAN
To Next Page
Loading...