Press [ENT] to view the following screen.
The PN, X, Y, Z and PC are viewed and can be edited.
If all items are OK, press [F5] [ACCEPT] to save them.
6.1.3 Circle Radius
The Center point and radius of the circle drawn by three points are calculated by this
function. You can store calculated Center point.
Input: 3 points
Output: Center point of the arc
Radius of the arc
From the LinertecExpress screen, press 4 to view the CALCULATION screen.
65
Center P
Radius
P1
P2
P3
To Next Page
Loading...
