EasyManua.ls Logo

Linhai Crossfire E5 2022 - Tire Pressure Inspection

Linhai Crossfire E5 2022
99 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHAPTER 2 MAINTENANCE LH50DU SERVICE MANUAL 19.1
CHAPTER 2 MAINTENANCE PAGE. 2-
11
Torque listed in the table. On wheel nuts, Make
sure tapered end of nut goes into taper on wheel.
Wheel Nut Torque Specifications
CAUTION: If wheels are improperly installed it could
affect Vehicle handling and tire wear.
2.8 TIRE PRESSURE
TIRE INSPECTION
CAUTION:
Maintain proper tire pressure. Refer to the warning
tire pressure decal applied to the vehicle.
Improper tire inflation may affect CUV
maneuverability.
When replacing a tire always use original equipment
size and type and replace in pairs, especially in 4X4
model.
The use of non- standard size or type tires may affect
CUV handling and cause machine damage, especially
in 4X4 model.
TIRE TREAD DEPTH
Always replace tires when tread depth is worn to 1/8"
(3mm ) or less.
Operating an CUV with worn tires will increase the
possibility of the vehicle skidding easily with possible
loss of control.
Worn tires can cause an accident.
Always replace tires when the tread depth measures
1/8" (3mm ) or less.
Bolt Size
Specification
Front M12X1.25
69Ft.Lbs
95Nm
Rear M12X1.25
69Ft.Lbs
95Nm
Tire Pressure Inspection
Front
Rear
see detail on the
mark of sidewall
see detail on the
mark of sidewall

Related product manuals