Link Controls CDO Series - Product Overview and Standards; CDO Operator Models and Options; Applicable Standards for Testing

Door Operator / CDO / LC- 3158 Rev.B – 3
Regulations and bases for testing
For connecting, programming and servicing, the following
regulations must be observed (the list is not exhaustive).
Construction product standards
- EN 13241-1 (Products without re resistance or smoke
control characteristics)
- EN 12445 (Safety in use of power operated doors -
Test methods)
- EN 12453 (Safety in use of power operated doors -
Requirements)
- EN 12635 (Industrial, commercial and garage doors and
gates - Installation and use.)
- EN 12978 (Safety devices for power operated doors and
gates - Requirements and test methods)
Electromagnetic compatibility
- EN 55014-1 (Radio disturbance, household appliances)
- EN 61000-3-2 (Disturbances in supply systems -
harmonic currents)
- EN 61000-3-3 (Disturbances in supply systems -
voltage uctuations)
- EN 61000-6-2 (Electromagnetic compatibility (EMC) -
Part 6-2: Generic standards - Immunity for industrial
environments)
- EN 61000-6-3 (Electromagnetic compatibility (EMC) -
Part 6-3: Generic standards - Emission standard for
residential, commercial and light- industrial environments)
Machinery guidelines
- EN 60204-1 (Safety of machinery, electrical equipment of
machines, part 1: general requirements)
- EN 12100-1 (Safety of machinery. Basic concepts,
general principles for design. Basic terminology,
methodology)
Low voltage
- EN 60335-1 (Household and similar electrical
appliances - Safety)
- EN 60335-2-103 (Particular requirements for drives for
gates, doors and windows)
Various options
The following package options are available for the
ange mounted CDO Rolling Door operator:
The operators listed below can be supplied with
various manual overrides.
CDO-50 1ph
CDO-100 3ph / 1ph
CDO-150 3ph
CDO-175 3ph
CDO-200 3ph / 1ph
CDO-275 3ph
CDO-300 3ph
CDO-375 3ph
CDO-400 3ph
4. Overview of products