12 – Door Operator / STA / LC- 2973 Rev.H
6.4 Digital Limits
Electronic interface
A: AVE plug (absolute value encoder plug)
B: AVE plug terminal (absolute value encoder
plug terminals.
Information:
Please refer to the control unit operating
manual for instructions on setting the limit
end positions.
A
B
Wiring allocation,
AVE (absolute value encoder) plug
The numbers on the plug are also the wire
numbers.
4: Safety circuit input (N/C)
5: RS 485 B
6: GND
7: RS485 A
8: Safety circuit output (N/C)
9: 7...18V
DC
AVE (absolute value encoder) plug terminal (7-12)
C: Thermal element in the drive
D: Manual emergency control
(emergency crank or emergency chain)
6. Initial Operation
To Next Page
Loading...
