To Next Page
L
Lisa SantiagoJul 29, 2025
Why Link Control Unit suspension will not maintain proper height?
- MMichael JonesJul 29, 2025
The Link Control Unit suspension might not maintain the proper height due to an obstructed air line or a defective HCV.
Why Link Control Unit suspension will not maintain proper height?
The Link Control Unit suspension might not maintain the proper height due to an obstructed air line or a defective HCV.
How to fix hard ride in Link Control Unit?
If you are experiencing a hard ride with your Link Control Unit, the ride height may be out of adjustment. To resolve this, readjust the ride height according to the vehicle service manual.
What to do if Link 600 Control Unit cab suspension overshoots center?
If the cab suspension of your Link Control Unit overshoots the center, try the following: * Replace the shocks. * Use a short delay H00450 HCV.
General| Product Type | Control Unit |
|---|---|
| Number of Digital Inputs | 8 |
| Number of Analog Inputs | 4 |
| Enclosure Rating | IP20 |
| Communication Protocol | Modbus RTU |
