41
Montaż panelu słonecznego
Setup
Sun
Step 1
Step 2
Step 3
Step 4
Step 5
Position the panel so that it can capture as much light as possible. It requires only
a few hours of direct sunlight per day to keep your camera charged 24 hours a
day. Use the included tools and cable to attach and setup the panel.
Remove the wall bracket from the solar panel and fix it
with the screws and plugs provided in the pack. (Anchors
should not be used in wood and metal).
Replace the solar panel on the bracket and make sure it is
properly secured.
Place the solar panel so that it faces directly into the
sunlight.
Connect the cable to the Link2home outdoor camera to
keep the camera fully charged.
To Next Page
Loading...
