57
Appendix B: Upgrading Firmware
Broadband Firewall Router with 4-Port Switch/VPN Endpoint
Appendix B: Upgrading Firmware
You can use the Router’s Web-based Utility to upgrade the firmware; however, if you do so, you may lose the
settings you have configured on the Router.
To upgrade the Router’s firmware, follow these instructions:
1. Download the Router’s firmware upgrade file from the Linksys website, www.linksys.com.
2. Extract the file on your computer.
3. Click the Administration tab and then the Firmware Upgrade tab of the Router’s Web-based Utility.
4. On the Upgrade Firmware screen, enter the location of the extracted firmware upgrade file, or click the
Browse button to find this file.
5. Click the Upgrade button, and follow the on-screen instructions.
Figure B-1: Upgrade Firmware
To Next Page
Loading...
