72
Appendix F: Configuring IPSec between a Windows 2000 or XP Computer and the Router
How to Establish a Secure IPSec Tunnel
ADSL Gateway with 4-Port Switch
16. Click the Connection Type tab, shown in Figure F-25, and select All network connections. Then click the
OK or Close button to finish.
17. From the Rules tab, shown in Figure F-26, click the OK or Close button to return to the secpol screen.
Step 4: Assign New IPSec Policy
In the IP Security Policies on Local Computer window, shown in Figure F-27, right-click the policy named
to_Router, and click Assign. A green arrow appears in the folder icon.
Figure F-25: Connection Type
Figure F-26: Rules
Figure F-27: Local Computer
To Next Page
Loading...
