Linksys BEFVP41

3
Now that you’re familiar with the
Router, follow these instructions for
quick installation.
A Before you begin, make sure
that all of your hardware is
powered off, including the
Router, PCs, hubs, switches,
and cable or DSL modem.
B Connect one end of an Ether-
net network cable to one of the
numbered ports on the back of
the Router. Connect the other
end to an Ethernet port on a
network device, e.g., a PC,
print server, hub, or switch.
Repeat this step to connect
more PCs or other network
devices to the Router.
C Connect your cable or DSL
modem’s Ethernet cable to the
Router’s Internet port.
D Power on the cable or DSL
modem.
E Connect the included power
adapter to the Router’s Power
port, and then plug the power
adapter into an electrical out-
let.
The Power LED on the front
panel will light up as soon as
the power adapter is con-
nected properly.
2
Connect the Router
E
C
B