EasyManua.ls Logo

Linksys Etherfast

Linksys Etherfast
57 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
EtherFast
®
Managed 24-Port
with Dual Gigabit Switch
Use this guide to install:
Linksys EtherFast
®
Managed 24-Port
with Dual Gigabit Switch (EF24G2M)
User Guide
Instant EtherFast
®
Series
Question and Answer IconNeed help?

Do you have a question about the Linksys Etherfast and is the answer not in the manual?

Linksys Etherfast Specifications

General IconGeneral
ModelEtherfast
Connectivity TechnologyWired
Data Link ProtocolEthernet, Fast Ethernet
FirewallYes
WirelessNo
TypeRouter
WAN Ports1
LAN Ports4
Data Transfer Rate100 Mbps

Summary

Introduction

Package Contents

Lists all items included in the switch package.

Getting to Know the Switch

LEDs

Explains the function of each indicator light on the switch.

Port Descriptions

Details the RJ-45, Gigabit, and Console ports on the switch.

Installing the Switch

Pre-Installation Considerations

Guidelines for choosing a location and preparing for installation.

Rack-Mounting the Switch

Instructions for securely mounting the switch in a standard 19-inch rack.

Powering on the Switch

Steps to connect the power cord and boot the switch.

Switch Management

Local Console Management

Guide to connecting and configuring the switch via a serial console port.

Configuring the Switch

Logging On to the Switch

Steps to access the switch's command-line interface.

Main Menu

Overview of the primary navigation options within the switch interface.

System Information Menu

Accessing basic switch hardware and firmware details.

Management Setup Menu

Adjusting communication parameters and user settings.

Network Configuration

Setting IP addresses and enabling Web management.

IP Configuration

Configuring IP address, subnet mask, and gateway.

Serial Port Configuration

Configuring serial port communication parameters.

SNMP Configuration

Setting up Simple Network Management Protocol parameters.

User Configuration

Managing user accounts and access rights.

Device Control Menu

Controlling port modes, mirroring, trunking, and VLANs.

VLAN Menu

Assigning ports to VLAN groups.

IP Menu

Configuring IP subnets, routing protocols, and IGMP.

Security Menu

Configuring security options for the switch.

Network Monitor Menu

Accessing port statistics and RMON statistics.

System Restart Menu

Resets the management agent and reloads defaults.

Troubleshooting

Common Problems and Solutions

Provides solutions for common installation and operation issues.

Appendix

Upgrading Firmware via the Serial Port

Steps to update the switch firmware using a serial connection.

Specifications

Warranty Information

Contact Information

Related product manuals