To complete setup, you will need a computer to visit http://LinksysSmartWi-Fi.com in a web
browser.
1. Identify your equipment.
If you have a separate modem
and standalone router, disconnect
and remove your old router.
If you have a modem-router,
leave it connected.
2. Position the antennas as shown and plug your router into a power source. Make
sure the power switch is in the | (on) position.
3. Connect your router to your modem or modem-router.
Plug one end of the included ethernet cable to the yellow Internet port on your new
router.
To Next Page
Loading...
