4
Back view
Adjustable antennas
—
For best performance, position the antennas vertically at a 90-degree angle.
Wi-Fi Protected Setup™ button—Press to configure wireless security on Wi-Fi Protected Setup-enabled network devices.
Reset button — Press and hold for until the power LED starts flashing to reset the router to factory settings. You can also
restore the factory settings using Linksys Smart Wi-Fi on the internet or mobile app.
Ethernet ports—Connect ethernet cables to these blue gigabit (10/100/1000) ports, and to wired devices on your network.
Note—For best performance, use CAT5e or higher rated cables on the ethernet ports.
Internet port— Connect an ethernet cable to this yellow gigabit (10/100/1000) port, and to a broadband internet
cable/DSL or fiber modem.
Note—For best performance, use CAT5e or higher rated cables on the ethernet ports.
Power port — Connect the included AC power adapter.
Power switch (European versions only) — Press
|
(on) to turn on the router.
To Next Page
Loading...
