EtherFast Cable/DSL Routers
25
Forwarding
Port forwarding sets up public services on your network. When users from the
Internet make certain requests of your network, the router will forward those
requests to the appropriate computer. The router's DHCP function must be
disabled to use Forwarding.
Forwarding is generally used to set up a webserver, ftp server, or e-mail serv-
er on your network. To add a server using Forwarding:
1. Enter the port number used by the server. On the same line, enter the IP
Address of the server that you want the Internet users to be able to access.
2. Configure as many entries as you would like until all of the link entries
are filled.
3. Click the Apply to save the settings.
To Next Page
Loading...
