8
Set Up
IMPORTANT—Your MR9000 can be set up as a primary node or a child in a whole home Wi-Fi
system. A primary node must be connected with an ethernet cable to your modem or modem-router.
Secondary nodes can be connected wirelessly or with ethernet cables.
If you are adding the router to an existing Velop whole home Wi-Fi system, factory reset all nodes
and add them to the system after your MR9000 is set up and working.
Download the Linksys app. You need this app to set up your router.
Go to the app store for your device and search for Linksys.
What you’ll need
To Next Page
Loading...
