Need help?Do you have a question about the Linksys PAP2-NA and is the answer not in the manual?
General| Category | Adapter |
|---|---|
| Connectivity | Wired |
| Voice Codecs | G.711, G.726, G.729a |
| QoS | Yes |
| Power Supply | 5V DC |
| Ports | 2 FXS |
| Network Interface | 10/100 Mbps Ethernet |
| Protocols | SIP |
| Interfaces | RJ-45 Ethernet, RJ-11 FXS |
| Fax Support | T.38 |
| Compatibility | SIP-compliant devices |
Guides users on connecting the Ethernet cable to the router and the power adapter to the device and outlet.
Step-by-step instructions for connecting telephones or fax machines to the PHONE 1 and PHONE 2 ports.
Lists interactive commands for checking DHCP, IP addresses, and enabling/disabling features.
Details commands for setting static IP addresses, network masks, and gateway IP addresses.
Provides instructions on how to initiate the IVR menu using a connected telephone.
Explains how to interact with the IVR menu, enter values, and manage selections.
Addresses frequent issues like no dial tone, LED status, and provides step-by-step solutions and reboot procedures.
Details the configuration steps for port forwarding on Linksys routers to ensure proper phone adapter function.
Covers problems with call connection or busy signals, including necessary reboot sequences for network devices.
To Next Page
