Need help?Do you have a question about the Linksys SPA9000 and is the answer not in the manual?
Physical Interfaces| Ethernet ports | 2 10/100BaseT RJ-45 |
|---|---|
| Phone ports | 2 RJ-11 FXS |
| Ring voltage | 40-55 VRMS |
| Ring frequency | 10 Hz - 40 Hz |
| Maximum ringer load | 3 REN |
Power| On-hook voltage | -50 V NOMINAL |
|---|---|
| Off-hook current | 25 mA min |
| Terminating impedance | Configurable, including 600 ohms |
Step-by-step guide for connecting and configuring the system for internal calls.
Configuration steps for enabling the system to make external calls.
Instructions on how to receive external calls and manage caller information.
Details on entering values and navigating the interactive voice response system.
Guidance on setting up your Internet phone service account with the system.
Steps to record, review, or delete auto-attendant greetings.
Section detailing configuration options for the router settings.
Section detailing configuration options for voice-related settings.
Addresses common installation and operation issues with their solutions.
Answers to common questions about system functionality and usage.
Steps to record custom greetings and configure the nighttime auto-attendant.
Details on how to interpret and convert digit sequences for outbound calls.
How to define dial plan rules for the auto-attendant script.
Explanation of auto-attendant parameters and XML scripting grammar.
Steps to convert a music file to the required G711u format.
Steps to configure the system to use the new music-on-hold file.
To Next Page
