Need help?Do you have a question about the Linksys SPA1001 and is the answer not in the manual?
General| Category | Adapter |
|---|---|
| Ports | 1 x FXS |
| Network Interface | 10/100 Mbps Ethernet |
| Protocols | SIP, RTP |
| Power Supply | 5V DC |
| Voice Codec | G.711, G.726, G.729 |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -20 to 70 °C |
| Relative Humidity | 10% to 90% (non-condensing) |
Discusses factors affecting perceived voice quality in IP telephony services.
Explains how to access and use the administration web server for configuration.
Guides the user through the initial setup and configuration steps for a Linksys ATA.
Describes the provisioning functionality for secure setup and remote upgrades.
Explains how to configure dial plans for interpreting digit sequences and outbound dialing.
Details how to implement secure call features and use mini-certificates.
Explains how to optimize fax completion rates and configure T.38 fax.
Offers solutions to common installation and operation problems.
Explains how VoIP callers establish connections for PSTN services.
Details how PSTN callers can make calls using two-stage dialing.
Explains how to automatically route outbound calls to PSTN when VoIP service is down.
Covers SIP parameters, timer values, and response code handling.
To Next Page
